Supplier & Trader of Desiccant Compressed Air Dryers. Our product range also comprises of Compact Air Dryers, and Refrigerated Air Dryers.
Heatless Desiccant Air Dryer
Product Price: Rs 3.08 Lakh / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
Automation Grade
Automatic
Voltage
230 V
Dryer Type
Regenerative Desiccant Dryer
Capacity
450 cfm 1000 cfm
Air Flow Rate
450 cfm to 1000 cfm
Maximum Pressure
16 bar
Maximum Air Inlet Temperature
45 Deg. C
Maximum Ambient Temperature
38 Deg. C
Control
LCD Display
Working Pressure
12.5 Bar
Grade
ISO:7183-1986 (E)
Cooling Method
Regenerative
Phase
Single Phase
Brand
Trident
Frequency
50 Hz
Model No.
DP-768
Certification
CE Certified
Moist air from the compressor is sent through the coalescing filter. Here water & oil coalesces and purges through theauto drain valve. The relatively clean air with water vapour passing through the aluminum drying tower fi lled with desiccant getscompletely dried (up to -40°C ADP) and then passes through a built in after filter (1 micron). The desiccant fines from the towers are completely removed and clean dry air is let out through the outlet port for use. Pre-filteration : The moisture laden compressed air passes through the pre filter. Here moisture load is reduced through coalescence. Condensation is removed through the drain valve ADV1. At the oil filter, oil vapours are removed completely and a small level of water condensation is purged through the valve ADV2. Drying : (Please refer figure) The Towers are filled with Activated Alumina as desiccant (Molecular sieve available as option). When air passes through Tower 1 which consists of “DRY” Desiccant, it gets completely dried, and passes through the check valve and the after filter. At the after filter, Desiccant fines are removed. Therefore, dry compressed air passes out at the outlet. Regeneration : (Please refer figure) Regeneration takes place in 2 stages a) De-pressurisation b) By passing Dry air. Tower II consists of fully moist desiccant in pressure. This is suddenly De-pressurised by opening the purge valve. Water molecules seep out of the desiccant and appear on the surface. “Super Dry” purge air passes through the Regeneration “Nozzle” and the desiccant bed thereby completely carrying away the water molecules. Tower II gets regenerated and is ready for the next drying cycle after the re-pressurisation.
Features l Designed For - ISO:7183-1986 (E)l Dryer Quality Class -ISO:8573-1 : 2010 (E)class 3 (-40 ADP)l Pressure Drop < 0.3 kg/cm² (g)l Fabrication Code: IS 2825 / ASME SEC VIII - Optionall LCD Displayl Stainless Steel Internalsl Filter made of aluminium with differential pressure indicatorl Operating voltage : 100 - 253 VAC 50+ 5% Hz 1 Ph.